The SolarGuardX 200 by SolarGuard is a rugged, solar-powered cargo GPS tracker and high-security padlock engineered for long-term outdoor telematics. Plaspy compatible out of the box, this GPS tracker pairs persistent solar charging, a large 14,400 mAh Li‑Polymer battery and an IP67-rated enclosure to deliver extended autonomy for container, trailer and remote-asset protection with real-time tracking and tamper alerts.
Designed for fleet management and anti-theft deployments, SolarGuardX 200 reports lock/unlock events, rope-cut and SIM-cover removal alarms in real time and supports remote and local opening via RFID, Bluetooth 5.1, OTA commands or SMS. With parallel GNSS (GPS + GLONASS + Galileo + Beidou) and a Qualcomm Gen 8C receiver, the unit gives accuracy better than 2.5 m CEP and frequent position updates for accurate telemetry and integration with Plaspy dashboards and alerts.
Key Highlights
- Plaspy compatible GPS tracker for reliable real-time tracking and fleet management of containers, trailers and outdoor assets.
- Long autonomy from a 14,400 mAh Li‑Polymer battery plus integrated solar panel for extended field operations.
- Rugged IP67 padlock form factor with tamper detection: rope-cut, SIM-cover removal and lock/unlock event reporting.
- High-accuracy GNSS: Qualcomm Gen 8C with GPS + GLONASS + Galileo + Beidou and <2.5 m horizontal accuracy (CEP).
- Multiple connectivity options (LTE Cat 4 / Cat 1 by SKU, WCDMA, GSM/EDGE) with TCP/UDP/MQTT/SMS reporting and optional MD5/AES256 encryption.
- Local and remote access methods (RFID, BLE 5.1, OTA, SMS) plus FOTA-enabled firmware management for fleet-wide updates.
- Compact, weatherproof design with USB‑C and 2‑pin 5V charging ports, onboard temperature sensor and status LEDs.
How It Works with Plaspy
SolarGuardX 200 integrates with Plaspy to deliver continuous GPS-based location, event telemetry and tamper alerts into your Plaspy account. The device pushes position updates, security events and sensor data using standard protocols (TCP/UDP/MQTT/SMS), enabling Plaspy to display real-time location, generate geofence notifications, and feed telemetry into fleet management workflows and reporting tools.
- Real-time location and telemetry updates (position reports as frequent as every 3 seconds)
- Lock/unlock events and tamper alarms (rope cut, SIM cover removal, locking/unlocking) forwarded to Plaspy for immediate alerts
- Buffered tracking: on-device storage of up to 49,000 location points for gapless history during coverage outages
- Remote control and commands via OTA or SMS for lock/unlock and device configuration from Plaspy
- BLE 5.1 accessory support (compatible with TOPFLYtech TSTH1-B, TSDT1-B and TSR1-B) to add temperature, motion or other sensor telemetry into Plaspy
Technical Overview
| Connectivity | LTE (FDD/TDD Cat 4 or Cat 1 depending on SKU), WCDMA, GSM/EDGE |
|---|---|
| Bands | GSM/EDGE 850 / 900 / 1800 / 1900 MHz (LTE/WCDMA bands vary by SKU) |
| Power & Battery | Rechargeable Li‑Polymer 14,400 mAh / 3.6 V; integrated solar panel; 2‑pin 5V DC charging port and USB Type‑C for charging/data |
| Interfaces | Nano SIM slot; status LEDs (network, GNSS, RFID, battery); one physical power switch; RFID reader; USB‑C; 2‑pin charging port |
| GNSS | Qualcomm Gen 8C receiver; parallel GNSS: GPS + GLONASS + Galileo + Beidou; horizontal accuracy < 2.5 m (CEP); update rate up to every 3 s; buffer up to 49,000 points |
| Bluetooth | BLE 5.1 for accessory sensors and beacons (compatible with listed TOPFLYtech sensors) |
| Remote Management | Firmware upgrade over the air (FOTA); OTA commands; reporting via TCP/UDP/MQTT/SMS; optional MD5 or AES256 encryption |
| Form Factor & Durability | Solar padlock design; IP67 waterproof (tested 5 m for 15 hrs); dimensions 207.5 × 110.2 × 48.1 mm; weight 1060 g; standard 350 mm rope; internal strong magnet for mounting; operating −25°C to +80°C |
| Security & Compliance | Reports lock/unlock and tamper events; certified FCC, CE, RCM, NBTC, TDRA, CITC, Anatel, ATEX |
Use Cases
- Container and trailer security — real-time anti-theft alerts, geofencing and remote unlock control for intermodal assets.
- Remote cargo monitoring — long autonomy and solar charging for extended voyages, with buffered location history during outages.
- Customs & asset protection — tamper detection (rope-cut, SIM cover removal) and certified hardware for international deployments.
- Outdoor equipment and high-value asset tracking — IP67 protection and onboard temperature sensing for exposed assets.
- Fleet management integration — position, motion and event telemetry feeding Plaspy for route auditing, geofence enforcement and operational reporting.
Why Choose This Tracker with Plaspy
SolarGuardX 200 is purpose-built for long-run outdoor telematics and anti-theft applications where reliability and autonomy matter. When paired with Plaspy, the device becomes a turnkey asset-tracking solution that combines precise GNSS positioning, persistent solar-assisted power, comprehensive tamper detection and multi-protocol reporting. Plaspy users gain real-time tracking, buffered history and automated alerts to protect cargo and improve fleet operations without frequent manual intervention.
For organizations needing robust telemetry, the SolarGuardX 200 supports BLE sensors for environmental or motion data, integrates with fleet workflows including fuel monitoring and immobilizer processes through Plaspy-driven rules and command flows, and is manageable at scale with FOTA and secure communication options. Its international certifications and rugged IP67 padlock design make it a practical choice for global deployments that require trustworthy, real-time asset protection and fleet management visibility.
Set Up SolarGuardX 200
To set the tracker send the following commands by SMS messages, the sample setup the device password is NLXh, this password is the default
- Set the time zone UTC-0
GMT,NLXh,0# - Set the operator APN
APN,NLXh,{{apn}},{{apnu}},{{apnp}}# - Set the GPRS server
IP,NLXh,54.85.159.138 8888# - Set the update interval, 60 seconds
TIMER,NLXh,60:60:0:0#